| Parameter |
Specification |
| Model |
PX2816B |
| Product Type |
Protocol Exerciser |
| Data Transmission Interface |
USB 3.0 Type-C |
| Protocol Exerciser Channels |
8 channels |
| Supported Protocols |
MIPI I3C, I²C, UART |
| Configurable Nodes |
Controller, MIPI I3C Target, I²C Legacy Target, Stress-Test Node |
| Maximum Sampling Rate |
2 GHz |
| Simultaneous Waveform & Protocol Analysis |
Supported |
| Protocol Decode & Analysis |
Supported |
| Packet Statistics |
Error and address packet statistics |
| I3C HDR Mode |
HDR-DDR supported |
| Hot-Join |
Supported |
| IBI – In-Band Interrupt |
Supported |
| Packet Import/Export |
JSON format |
| I3C Controller Frequency |
Legacy I²C: 50 kHz–1 MHz |
| Push-Pull Output Frequency |
100 kHz–13 MHz |
| Open-Drain Output Frequency |
100 kHz–2.5 MHz |
| Pull-Up Resistance |
100 Ω–100 kΩ |
| Configurable I/O Voltage |
1 V–5 V |
| I/O Voltage Resolution |
1 mV |
| I/O Voltage Accuracy |
±100 mV |
| DC Output Voltage |
1 V–5 V |
| DC Output Resolution |
10 mV |
| DC Output Accuracy |
±100 mV |
| Timing Resolution |
5 ns |
| Error Injection |
I3C S0–S5, custom CRC, Preamble, abnormal SDR packets, reserved CCC values |
| Python API |
Python Automation Control API |
| GPIO |
2 sets of GPIO ports |
| Power Measurement |
DC output with simultaneous power-consumption measurement |
| DC Output |
0.1–5 V |
| Logic Analyzer Option |
16 channels, 2 GHz timing analysis |
| Logic Analyzer Buffer |
4 Gb built-in DDR |
| Protocol Triggers |
20+ |
| Protocol Decodes |
100+ |
| Protocol Analyzers |
20+ |
| Storage |
PC RAM / PC hard drive; optional M.2 2280 PCIe Gen3 or higher SSD |
| SSD Recording |
Direct recording to device SSD supported with optional compatible SSD |
